Author Topic: jazz firediabolo  (Read 6309 times)

woras

  • VotW Contributor
  • Thanks: 0
jazz firediabolo
« on: June 20, 2006, 12:17:53 am »
hello everyone

I want shere with you my way to do firediabolo for less then 30 euro:)

in this topic I also add tips tricks and sugestions about whole firediabolo I have made.

for begining some photos



this is all stuff you will need(most important musztarda kozaka made by Roleski and of course dżem by Łowicz)

both avable in Poland:)


now few simple steps and you have



anyone interested??

matthewthegreat

  • Thanks: 1
jazz firediabolo
« Reply #1 on: June 20, 2006, 12:35:27 am »
Thats very cool!!  :lol:

seán_

  • Moderator
  • Thanks: 49
jazz firediabolo
« Reply #2 on: June 20, 2006, 01:01:10 am »
I've used one of these (not lit) and its a nice bit of kit.

Dracodragon

  • VotW Contributor
  • Thanks: 18
jazz firediabolo
« Reply #3 on: June 20, 2006, 01:03:57 am »
Hmm, wont that melt?
Go Draco with your Diabolo!
http://frogfighters.com/godraco/

woras

  • VotW Contributor
  • Thanks: 0
jazz firediabolo
« Reply #4 on: June 20, 2006, 01:11:59 am »
melt.....yes of course:(

so next what I do is send you photo after 10fires and after obout 40 fires

and you will have parallel

seeya soon

Dracodragon

  • VotW Contributor
  • Thanks: 18
jazz firediabolo
« Reply #5 on: June 20, 2006, 01:17:05 am »
Haha, well the jazz arent really the best diabolos so it aint too big a loss i suppose. If it were a circus though... now thats a different story.
Go Draco with your Diabolo!
http://frogfighters.com/godraco/

woras

  • VotW Contributor
  • Thanks: 0
jazz firediabolo
« Reply #6 on: June 20, 2006, 01:39:16 am »
for firediabolo are best!!!

they have the same rubber and they have less weight

mayby they will by better with axels??(my mistake-teflon hubs of course)

whole idea of jazz firediabolo is not new and its not my:)

everything I borrow from maulicapio circus from Poland

they have similar firediabolos one circus and one jazz

and the weight win!!!!

jazz is best!!

frank0072

  • Thanks: 0
jazz firediabolo
« Reply #7 on: June 20, 2006, 07:43:09 am »
Quote from: woras


mayby they will by better with axels??


Yeah, most of the time diabolo goes better if you have an axle  :roll:
some people think they are better because they can do something better

(\__/)
(='.'=)
(")_(")

Marco

  • Thanks: 0
jazz firediabolo
« Reply #8 on: June 20, 2006, 09:58:36 am »
:shock:  Hooray!!!
Jazz fire diabolo is SO NICE!
I have just 2 normal jazz diabolo but i think i have something else on my mind  :twisted:

Geppo

  • Thanks: 0
jazz firediabolo
« Reply #9 on: June 20, 2006, 01:51:51 pm »
Hi!

You've stolen my project! ghghgh  :evil:  :D  :D

I made a similar kit for my black circus

Instead of a threaded bar i have used a threaded alluminum tube.

At the external hedge of the tube i fixed a stand for hydraulic tube (16mm max dia) and insert a kevlar string (15mm dia) like a bow.

Now i'm developing a new version 'cause the bow,rotating, push the oil all around.
In this new version the kevlar string will be fixed to the whole rim of the cap.

That because one of the most important thing that bring me to develop a FIRE KIT by myself is the effect of the  central kevlar ..just a "static" flame...so boring.

i can link you a demo of my old project...soon the newest one.

Diaboler: Busk

www.busk.altervista.org/bouskfuoco.MOV

ID: test
PWD: test

A you can see the fire last a little beacause all the oil was on the floor.

woras

  • VotW Contributor
  • Thanks: 0
jazz firediabolo
« Reply #10 on: June 26, 2006, 03:28:45 am »
yes its propably not first homemade firediabolo but its good to have somebody  to compare experience!!!

so this is my firediabolo in work




as Dracodragon wrote its melt and this is how




left its about 10fireshow old and right mayby40
as you see its not live time warranty

you must calibrate diabolo after few fire and straighten axels if to much drop



soon I give you some tips!!!bless

seán_

  • Moderator
  • Thanks: 49
jazz firediabolo
« Reply #11 on: June 26, 2006, 03:31:12 am »
would it be worth foil taping the edges to cut down on the melting?

I know that could cause some balance problems but it might help.

Scooby

  • Thanks: 1
jazz firediabolo
« Reply #12 on: June 26, 2006, 06:30:49 am »
i could never do that to my diabolos.
------------------------------------------------
ALL YOUR DIABOLO ARE BELONG TO US!!!
------------------------------------------------

frank0072

  • Thanks: 0
jazz firediabolo
« Reply #13 on: June 26, 2006, 07:51:42 am »
aaww, it hurts to see that diabolo so f****d up... I can't believe you do that to your props... one day all diabolo's will turn against you, remember that
some people think they are better because they can do something better

(\__/)
(='.'=)
(")_(")

Scooby

  • Thanks: 1
jazz firediabolo
« Reply #14 on: June 26, 2006, 09:08:23 am »
thats just like if i were to dip my clubs into petrol, then set them of fire, saying they were fire clubs..  then they just melted and i couldnt use them anymore.


i cant see how this fire diabolo is cost productive at all.

you have to buy a new jazz pretty much the day after you melted it.
------------------------------------------------
ALL YOUR DIABOLO ARE BELONG TO US!!!
------------------------------------------------

Geppo

  • Thanks: 0
jazz firediabolo
« Reply #15 on: June 26, 2006, 09:41:43 am »
I've try my own fire CIRCUS.

So nice efefct.

I use a Tuna tin...(7 cm dia) so nice...no much heat on the axle.
a lot of fire..and...

oh yes..i used a kevlar rope on the rim of the tin so the efefct was of a fire circle and not a spot.

unfortunately i don't have any photo...next time i'll post some.

...ma ciaoo!

P.S: no melt for the moment!  :wink:

seán_

  • Moderator
  • Thanks: 49
jazz firediabolo
« Reply #16 on: June 26, 2006, 02:58:13 pm »
Quote from: Scooby

i cant see how this fire diabolo is cost productive at all.

you have to buy a new jazz pretty much the day after you melted it.


I dont see it that way at all, lets say you get 40 sessions with it, as long as one of those sessions is a paid gig you have definately covered the cost of the diabolo, if not I work it out as 50p a session, and if you are having a nice friendly fire session with a few spinners and jugglers you'd probably be throwing that in the tin to cover the 'fin costs.

Whilst a 'proper' fire diabolo will last longer, all but a nesbitt can be totalled by one bad drop (plus they are dogs to use usually)

woras

  • VotW Contributor
  • Thanks: 0
jazz firediabolo
« Reply #17 on: June 26, 2006, 03:17:56 pm »
if I find some way to protect them...

mayby antyfire paint

its also for me not easy tu burn my diabolo but the fun is truly super

special with two diabolos throws



and just as seán_  say the cost is nothing looking for the gratification

one time I get peinting other time 100polisch zloty[its about 25euro] for one fire and lots of good words!!!

Scooby

  • Thanks: 1
jazz firediabolo
« Reply #18 on: June 27, 2006, 08:16:53 am »
i thaught it got like that after one session :lol:

how much does it cost for you to get a henrys jazz?

over here its pretty much the same amount as a circus...
------------------------------------------------
ALL YOUR DIABOLO ARE BELONG TO US!!!
------------------------------------------------

uiek

  • Thanks: 0
jazz firediabolo
« Reply #19 on: June 27, 2006, 09:50:46 am »
Diabolo Jazz costs in Poland about 120zł (ca. 30 euro)
Cicrus is about 150zł (ca. 37 euro)