Author Topic: Sundia Sun Series Diabolos (Read 37222 times)

TomMiller · « **Reply #60 on:** December 21, 2007, 04:31:08 pm »

YEEESSSSS!!!!!!!

woo ordered a crystal sun

to happy words cant explain

WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Niclas · « **Reply #61 on:** December 21, 2007, 04:59:37 pm »

My dad had also ordered 2 crystal suns to me.
Christmast gift.

nev · « **Reply #62 on:** January 09, 2008, 09:44:07 pm »

For all you nice people who bought Crystal Suns recently, the Sundia LED light kits are now back in stock.

They fit both the Fly and Sun diabolo's (check the website to see which colours work best).

When fitting to a Sun diabolo I'd recommend also getting a set of Fly washers to replace the metal ones on the Sun. This keeps the total weight down to 302g with LED's fitted.

I've also got the replacement white hubs for the Sun which I'll get back up in stock in a short while.

TomMiller · « **Reply #63 on:** January 09, 2008, 09:57:56 pm »

Wll the fly washers still fit in the suns?

Martijn · « **Reply #64 on:** January 09, 2008, 10:06:58 pm »

Basically Fly = Sun, so yes.

relic · « **Reply #65 on:** January 11, 2008, 01:58:28 am »

Damn I'm glad it's my birthday soon, these are defiantly going on my list.

Just to confirm, it isn't possible to get the fly bearing axle to fit into the sun is it?

If not are there any plans to make a bearing axle kit for the sun?

I like the sound of the fly axle but I don't trust myself with plastic cups, I still drop stuff far too often

William · « **Reply #66 on:** January 11, 2008, 04:56:31 am »

Quote from: relic on January 11, 2008, 01:58:28 am

Damn I'm glad it's my birthday soon, these are defiantly going on my list.

Just to confirm, it isn't possible to get the fly bearing axle to fit into the sun is it?

If not are there any plans to make a bearing axle kit for the sun?

I like the sound of the fly axle but I don't trust myself with plastic cups, I still drop stuff far too often

No you cannot. Nev has already tried. They really should make bearings on the sun.. Nev? Any plans?

tommi · « **Reply #67 on:** January 11, 2008, 02:24:59 pm »

Since I don't have any Suns or Flys, could someone (Nev) tell me why exactly cannot a Sun be modified into bearing mode? I mean which parts are different in Suns compared to Flys?

Beni · « **Reply #68 on:** January 11, 2008, 04:19:43 pm »

What William and tommi said.
If the sun is the 'solid' version of the fly, shouldn't you make a bearing axle for the sun?

Beni

nev · « **Reply #69 on:** January 12, 2008, 02:15:44 pm »

Whilst the Sun shares the same axle as the "fixed" fly - all the other bits are different.

It was designed to have the same stability and feel of the Fly but that is where the similarity ends - the Sun is designed and put together in a completely different way. The hubs and the cups are not made to accommodate the bearing bits.

It is still possible to fit the bearings with A LOT of modification (I have done it) but a better option would be to have some Fly design cups made from the Sun material - I have asked Sundia about this possibility already.

Scooby · « **Reply #70 on:** January 21, 2008, 03:11:00 am »

Wow. these new diabolos have swept everyone away!

Does anyone use good old henrys anymore?

i do...

does that make me old-new school ? haha

are they really that much better?

Eric Moffett · « **Reply #71 on:** January 21, 2008, 03:21:25 am »

Actually using these have not impressed me at all. I'm a finesse guy, I own two Suns, and they're very heavy; I put the Fly washers in them that helped a little. One thing I noticed in 2d is that I'm correcting A LOT and they're sluggish. I haven't used them much for 1d but if your used to light weight diabolos I would definitely suggest against these and probably for Taibolos, but I would like to get a couple of Taibolos first. ALTHOUGH they are still good diabolos nonetheless.

In a nut shell - if you like light diabolos these aren't for you, if you like heavy diabolos they are for you.

Scooby · « **Reply #72 on:** January 21, 2008, 03:29:11 am »

ah ok, so they arent made of magic.

im sticking with my henrys.

Eric Moffett · « **Reply #73 on:** January 21, 2008, 03:39:35 am »

Quote from: Scooby on January 21, 2008, 03:29:11 am

ah ok, so they arent made of magic.

im sticking with my henrys.

Sorry if it wasn't clear I fixed it. I like LIGHT diabolos and these are HEAVY, but if you LIKE HEAVY diabolos the go a head and GET THESE they're still good diabolos but my style isn't adjusted for heavy diabolos...

hyperflame · « **Reply #74 on:** January 29, 2008, 05:44:23 pm »

Does the sun diabolos make noise?

seán_ · « **Reply #75 on:** January 29, 2008, 05:51:05 pm »

Only on drops and 2d corrections (oh probably when grinding as well)

I's a standard diabolo, not a bearing one so it wont have the noise a fly makes.

hyperflame · « **Reply #76 on:** January 29, 2008, 07:59:10 pm »

oh ok, Do you think the Suns are good? Are they very balanced?

TomMiller · « **Reply #77 on:** January 29, 2008, 08:05:22 pm »

yes VERY!!!!!! stable

Dennis · « **Reply #78 on:** February 09, 2008, 01:37:30 pm »

i've got a question!
what's the difference between a sun and a fixed fly?

fzzyrn · « **Reply #79 on:** February 09, 2008, 01:47:53 pm »

fundamentally, flys and suns are two very different diabs. They just share some parts.

News:

Author Topic: Sundia Sun Series Diabolos (Read 37222 times)

Beni