Author Topic: sundia bearing fixed  (Read 1215 times)

rochdalejak

  • Thanks: 2
sundia bearing fixed
« on: September 11, 2010, 07:17:11 pm »
a few months ago i started a topic called sundia help because my sundia fly had broke but ive fixed it now and im going to tell you how to fix it.

if your cups can twist you need to do this, take the nuts off the axle and where the plastic meets the axle if you can see a tiny hole there you need to put a tiny tiny bit of blue tac there so you cant see the hole any more. Then you need to put the diabolo on its side like your about to start it and put a little bit of super glue there ( use your common sense not too much but not too little depenneding on the size of the hole )leave to dry on its side but as its drying make sure the clutch is still working and wait untill super glue has dryed put nuts back on and smile :)

THIS IS NOT GARRENTED TO WORK SUPER GLUE COULD GET IN TO THE CLUTCH AND RECK IT IF YOU ARE GOING TO DO THIS IT IS A RISK IT WORKED FOR ME IT MIGHT NOT WORK FOR YOU!!!!!!!!
:) yep thats me