Author Topic: Fitting lights to quartz triple beaing diabolo  (Read 2931 times)

Tian

  • Thanks: 0
Fitting lights to quartz triple beaing diabolo
« on: January 23, 2015, 07:54:54 PM »
Hi

Can anyone explain to me how to fit the lights, the bolts are very hard to undo.

Thankyou

MBg4

  • Thanks: 2
Re: Fitting lights to quartz triple beaing diabolo
« Reply #1 on: January 23, 2015, 09:05:43 PM »
Welcome to the Forum,

Are you talking about these (or something similar): http://www.netjuggler.net/acheter/diabolo-quartz.html ? If not, it shouldn't matter because a lot of "cheaper", china made bearing diabolos use the same or similar type of bearing nuts, axle, etc.
I use a socket wrench, 10mm, with another 10mm socket wrench attachment on the other side to keep the other nut in place. So basically just a 10mm socket wrench and something else on the other side to keep it in place.
https://www.youtube.com/watch?v=Nk4-6G0MQE4
That's a video in French but shouldn't be too hard to understand what to do. (That is if this is the light kit I imagine you're talking about)

Have fun.

 

SimplePortal 2.3.7 © 2008-2021, SimplePortal