Author Topic: Fan Trouble  (Read 2256 times)

legand in the making

  • Guest
Fan Trouble
« on: October 19, 2008, 12:17:46 PM »
OK, i know there are LOADS of fan threads BUT I've recently started doing this trick and I'm getting pretty much nowhere. i can get into the trick but one diabolo allways dies on me after the first two or three rotations. :-|
i usually use the entry where you start with an arm stall if that helps.

please help me!  :)

William

  • VotW Contributor
  • Thanks: 46
Re: Fan Trouble
« Reply #1 on: October 19, 2008, 12:25:02 PM »
You're either fanning way too fast. Or your diabolos (specifically the left one) doesn't have enough speed. Or possibly a combination of both. Try give the diabolos more speed and fan a little slower.
William - YouTube! "NO! If they're blue, you should not touch your nuts." - Aaro

allsoppy5

  • Thanks: 5
Re: Fan Trouble
« Reply #2 on: October 19, 2008, 01:42:19 PM »
Try an s-fan.
This is when the left diabolo is in a backside so both the diabolos gain speed.

Alex!

  • VotW Contributor
  • Thanks: 24
Re: Fan Trouble
« Reply #3 on: October 19, 2008, 01:48:55 PM »
I have loads of trouble with fans.
They just wont leave me alone.
STOP! HAMMER 'TIJN

legand in the making

  • Guest
Re: Fan Trouble
« Reply #4 on: October 19, 2008, 05:45:07 PM »
thanks both william and allospy!
that was the kind of advice i needed!

i can do fan much better now and have learnt s-fan! thanks!

Ben.

  • VotW Contributor
  • Thanks: 45
Re: Fan Trouble
« Reply #5 on: October 19, 2008, 07:36:20 PM »
I have loads of trouble with fans.
They just wont leave me alone.
Me too, will, just leave us alone...

 

SimplePortal 2.3.7 © 2008-2022, SimplePortal