Author Topic: sundia fly help  (Read 2459 times)

rochdalejak

  • Thanks: 2
sundia fly help
« on: September 06, 2010, 04:31:47 PM »
my sundia fly hubs are coming away from my axle (there is a bit of plastic melted to the axle that keeps the hubs onthe axle.That bit of plasic is broken) is there any way i can fix it with out super glue ( because it might get in to the breaing) this is the same on the sundia shinning so if its happened to your sundia fly or shinning and you have fixed it can you help me



thanks
:) yep thats me

Arthur

  • Thanks: 18
Re: sundia fly help
« Reply #1 on: September 06, 2010, 05:53:49 PM »
Could you post a picture to clarify?

Marko

  • VotW Contributor
  • Thanks: 79
Re: sundia fly help
« Reply #2 on: September 07, 2010, 11:39:02 AM »
There's spare hub you could buy if the ones you have are broken. Would that do the trick?
┬źDiabolo, whiter than the whitest!┬╗

rochdalejak

  • Thanks: 2
Re: sundia fly help
« Reply #3 on: September 07, 2010, 05:58:46 PM »
its the cup where the screws are screwed n and ill try to get a picture
:) yep thats me

rochdalejak

  • Thanks: 2
Re: sundia fly help
« Reply #4 on: September 11, 2010, 06:57:59 PM »
thanks for all of your help but i tryed super glue and it worked !!!!!!!!1 :-D
im gonna make a new topic about how i fixed it


thanks!!!!!!!!!!! 8)
:) yep thats me

Rickr

  • Thanks: 10
Re: sundia fly help
« Reply #5 on: September 11, 2010, 09:01:34 PM »
can you also but sundia shining axles?

rochdalejak

  • Thanks: 2
Re: sundia fly help
« Reply #6 on: September 11, 2010, 09:49:39 PM »
yes i think its the same
:) yep thats me

Rickr

  • Thanks: 10
Re: sundia fly help
« Reply #7 on: September 12, 2010, 08:11:19 AM »
thinking is not enough=P

 

SimplePortal 2.3.7 © 2008-2021, SimplePortal