Author Topic: Sundia Sun Diabolo Problem...  (Read 1848 times)


  • Thanks: 1
Sundia Sun Diabolo Problem...
« on: October 18, 2010, 10:26:40 PM »
Hi everyone !

Right I have a slight problem with a sundia sun diabolo (the triple bearing one)  :-|

Basically the cups can twist a certain amount, which when the diabolo is at speed causes it to go off balance. This is because where the hubs are there is a small metal part with 4 prongs on it that holds the cups on the shaft (if you take it apart you will see what i mean), and this bit is nackered. Anyone know if this metal part comes with a new set of replacement hubs ... and if not where i could get one?

(its nothing to do with the bolts not being tight enough etc)

Any help appreciated  :o

Alex  8)


  • VotW Contributor
  • Thanks: 79
Re: Sundia Sun Diabolo Problem...
« Reply #1 on: October 19, 2010, 09:32:13 AM »
It doesn't come with replacement hubs. PM me your address (including country) I'll ship you that part for free.
┬źDiabolo, whiter than the whitest!┬╗


SimplePortal 2.3.7 © 2008-2022, SimplePortal